Sonatest SiteScan 380M Digital Ultrasonic Flaw Detector For Sale

Key Specifications

• Test Range: 0–1 mm (0.04 in) up to 20,000 mm (787 in) in steel at 5930 m/s (19,455 ft/s)

• Velocity: 256–16,000 m/s, continuously variable

• Probe Zero: 0 to 1,000 µs

• Delay: 0–20,000 mm (800 in) in steel at 5930 m/s

• Gain: 0–110 dB, adjustable in 0.1, 0.5, 1, 2, 6, 14, and 20 dB steps

• Test Modes: Pulse echo and transmit/receive; Single Crystal, Double Crystal, and Pitch-Catch

• Damping: 50 and 400 Ohm damping selectable

• Pulser: 100–450 V negative spike and square wave; Pulse width from 30 ns to 2500 ns; Rise/Fall times <5 ns into 50 Ω load

• Pulse Repetition Frequency (PRF): Adjustable 5 Hz to 6 kHz; External sync also available

• Screen Update Rate: 60 Hz

• Rectification: RF, Full wave, +ve half-wave, and -ve half-wave

• Frequency Range: 8 selectable filter bands:

  • i) 100 kHz – 500 kHz

  • ii) 200 kHz – 800 kHz

  • iii) 0.4 MHz – 1.6 MHz

  • iv) 1.4 MHz – 3 MHz

  • v) 3 MHz – 8 MHz

  • vi) 7 MHz – 15 MHz

  • vii) 9 MHz – 21 MHz

  • viii) 1.6 MHz – 33 MHz (Wideband)

• System Linearity: Vertical = 0.5% Full Screen Height (FSH); Horizontal ±0.2% Trace Full Screen Width (FSW)

• Reject (Selectable): Up to 80% Linear reject (removes baseline noise without affecting indication amplitude) or up to 50% Suppressive reject (increases zero offset and reduces amplitude of all echoes)

• Units: Metric (mm), inch (in), or microseconds

• Display: Sonatest SiteScan 380M Colour Transflective VGA (640 x 480) TFT; Display area: 116.16 x 87.2 mm (4.57 x 3.43 in); A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS); 9 colour options with variable brightness

• Gate Monitor: Two independent gates for measurement and monitoring; Start and width fully adjustable over the entire range of the instrument; Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visual alarms; Gate resolution is 5 ns

• Zoom: Expands range and delay to cover the area set by Gate 1 start & width controls

• Automatic Gain Control (AGC): Automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%

• Measurement Nodes: Various modes including Signal monitor, Depth and amplitude of first signal in gate, Echo-Echo distance measurements, Trigonometric display of beam-path, surface distance (including X-offset) and depth of indication from the inspection surface together with echo amplitude; Curved surface correction can be applied for convex and concave surfaces; Half-skip can be indicated on screen

• Measurement Display: Live display and updates on screen at 3 times per second; Large display of a single measurement available

• Contour: Trailing-Edge slew-rate control to reduce half cycles in rectified modes; Selectable from one of 6 levels

• Waveform Smoothing: Select from: i) None (both min and max values are displayed in the A-Scan); ii) Fill (Min values set to baseline value, produces a solid A-Scan); iii) Smooth (min values ignored, produces a clear outline A-Scan)

• Persistence: Causes previous A-scans to “fade out” at a user-determined rate

• Auto-Cal: Provides automatic calculation of velocity and probe zero from 2 reference echoes

• Reference Waveform: Displays a previously stored A-log in a colour different from the active display: enabling a quick visual check of the differences

• Clock: Built-in, battery-backed RTC keeps time and date; Visible on the status line, always stored with Panels, A-logs etc.

• Internal Memory: 4 GB storage available for A-scans, panels, T-logs, B-logs etc.; 450,000 Panels, 200,000 A-Logs, 300,000 B-Charts, 440,000 T-Logs

• Active Peak Memory: Retains all A-scans on screen for echo-dynamic pattern analysis, with the active A-scan displayed in a separate colour

• Notes: Alphanumeric labelling for panel stores, A-logs, B-logs etc.

• Display Freeze: Hold the current waveform on screen for off-line processing

• Help Key: Shows software and hardware information

• Language Support: Multiple languages are selectable from a list including: English, French, Spanish, Russian, Chinese (Modern); Others are available on request

• Encoder Connection: Lemo min 4-pin connector (D70) D-Sub 15 connector (700M)

• Video Output: Standard